Configuration Modem/Routeur ADSL Zyxel 643



Pour l'accés à l'Internet via ADSL avec un modem/routeur 643.

  • Connectez le routeur à un PC via le port série avec le cordon fourni.
  • Lancez un logiciel de communication type Kermit, Hyperterminal, etc ...
  • Paramètrage de la liaison : 9600 bauds, 8 bits, sans parité.
  • Envoyer un Retour Chariot.
  • Le routeur demande un mot de passe.
  • Mot de passe par défaut : 1234

    Ecran Principal
                        Copyright (c) 1994 - 2001 ZyXEL Communications Corp.
    
                                  Prestige 643 Main Menu
    
         Getting Started                      Advanced Management
           1. General Setup                     21. Filter Set Configuration
           3. Ethernet Setup                    22. SNMP Configuration
           4. Internet Access Setup             23. System Password
                                                24. System Maintenance
                                                25. IP Routing Policy Setup
         Advanced Applications                  26. Schedule Setup
           11. Remote Node Setup
           12. Static Routing Setup
           15. SUA Server Setup                 99. Exit
    
    
                              Enter Menu Selection Number:
    
    

    Suivre l'ordre des menus suivant :


    Menu 1 General Setup
    
    
                                 Menu 1 - General Setup
    
                        System Name= Zyxel
                        Location= Votre_Ville
                        Contact Person's Name= Votre_Nom
    
                        Route IP= Yes
                        Route IPX= No
                        Bridge= No
    
                        Press ENTER to Confirm or ESC to Cancel:
    
    



    Menu 3 Ethernet Setup
    
                                 Menu 3 - Ethernet Setup
    
                        1. General Setup
                        2. TCP/IP and DHCP Setup
                        3. Novell IPX Setup
                        4. Bridge Setup
    
    
                              Enter Menu Selection Number:
    
    



    Menu 3 -2 Ethernet Setup - TCP/IP and DHCP Setup
    
                        Menu 3.2 - TCP/IP and DHCP Ethernet Setup
    
                        DHCP Setup
                          DHCP= Server
                          Client IP Pool Starting Address= 192.168.1.33
                          Size of Client IP Pool= 32
                          Primary DNS Server= 193.252.19.3
                          Secondary DNS Server= 193.252.19.4
                          Remote DHCP Server= N/A
                        TCP/IP Setup:
                          IP Address= 192.168.1.1
                          IP Subnet Mask= 255.255.255.0
                          RIP Direction= Both
                            Version= RIP-1
                          Multicast= None
                          IP Policies=
                          Edit IP Alias= No
    
                        Press ENTER to Confirm or ESC to Cancel:
    
    

    *Options retenues :


    Menu 4 Internet Access Setup
    
                             Menu 4 - Internet Access Setup
    
                        ISP's Name= Wanadoo
                        Encapsulation= PPPoE
                        Multiplexing= LLC-based
                        VPI #= 8
                        VCI #= 35
                        Service Name= any
                        My Login= fti/VOTRE_LOGIN@fti
                        My Password= ********
                        Single User Account= Yes
                        IP Address Assignment= Dynamic
                          IP Address= N/A
                        ENET ENCAP Gateway= N/A
    
    
                        Press ENTER to Confirm or ESC to Cancel:
    
    



    Menu 23 - 1 Changement du mot de passe
    
                    Menu 23.1 - System Security - Change Password
    
                        Old Password= *********
                        New Password= *******
                        Retype to confirm= *******
    
    
    
                       Enter here to CONFIRM or ESC to CANCEL:
    
    



  • Mettre ici le mot de passe vous permettant de configurer le routeur


    Menu 24 Tests de connexions
    
    
                              Menu 24 - System Maintenance
    
                             1.  System Status
                             2.  System Information and Console Port Speed
                             3.  Log and Trace
                             4.  Diagnostic
                             5.  Backup Configuration
                             6.  Restore Configuration
                             7.  Upload Firmware
                             8.  Command Interpreter Mode
                             10. Time and Date Setting
    
    
                              Enter Menu Selection Number:
    
    



    Menu 24 - 4 Test de la connexion
    
    
                       Menu 24.4 - System Maintenance - Diagnostic
    
         ADSL                                 System
           1.  Reset ADSL                       21. Reboot System
                                                22. Command Mode
    
    
    
    
         TCP/IP
           12. Ping Host
    
    
                              Enter Menu Selection Number:
    
                        Host IP Address= N/A
    
    
    


  • Choisir l'option 12 puis entrez une adresse IP de machine sur l'Internet. exemple 195.101.76.1.

    Résultat correct du test
    Start connection. Wait for 6 seconds for next PING
    Resolving 195.101.76.1... 195.101.76.1
    195.101.76.1 (1351 ms) seq=0
    ### Enter y to send next PING. any other key to return ###
    


    Ecran 24 - 1 Status en connexion
    
    
                         Menu 24.1 - System Maintenance - Status
    
    Node-Lnk Status      TxPkts      RxPkts      Errors  Tx B/s  Rx B/s     Up Time
     1-PPPoE Up             546         326           0   17248     360     0:02:34
     2       N/A              0           0           0       0       0     0:00:00
     3       N/A              0           0           0       0       0     0:00:00
     4       N/A              0           0           0       0       0     0:00:00
     5       N/A              0           0           0       0       0     0:00:00
     6       N/A              0           0           0       0       0     0:00:00
     7       N/A              0           0           0       0       0     0:00:00
     8       N/A              0           0           0       0       0     0:00:00
    
    
    
    
        Ethernet:                                    WAN:
          Status: 100M/Full Duplex Tx Pkts: 521        Line Status: Up
          Collisions: 0            Rx Pkts: 854        Upstream Speed:   160 kbps
        CPU Load =    7.13%                            Downstream Speed:   608 kbps
                                     Press Command:
                          COMMANDS: 1-Reset Counters  ESC-Exit
    
    
    
    
    

  • Voila, c'est simple !
  • Votre routeur est maintenant opérationnel.
  • Pour les options plus avancées, voir la doc et votre administrateur réseau.
    Eldin'net Pour me contacter